Burglar Alarm System Curtain PIR Motion Detectors

Burglar Alarm System Curtain PIR Motion Detector
3.4/5 rating (5 votes)

Unifore, the global leading security equipment manufacturer is delighted to provide you a wide range of PIR motion sensors for security protection applications. Here we introduce a curtain type PIR motion detector which has the capability to detect criminals and threats effectively. Comparing wide angle PIR motion sensor, the curtain PIR detectors are designed to protect entry-points such as doors, windows and corridors. The name “Curtain” derives from its working theory - when it works, it will create an virtual curtain detection area. Once unwanted people enter/cross this virtual curtain area, a motion alarm will be triggered. It’s a beautiful design device adopts mini size, it’s miniature and cannot be easily discovered by intruders.

Our curtain PIR motion sensor has the capability to recognize direction of moving people. It only triggers alarm when people enter monitored area from outside, people moving inside will not generate an alarm. This enables it to filter false alarms effectively and becomes the best suitable detector for interior intrusion detection purpose. Furthermore, it has tamper switch design can generate an alarm when encountering vandalism.

The detector is a hardwired security sensor with normal close relay output. It’s able to work with your existing or new hardwired alarm panels/controllers. It should be noted that when wiring the detector to your hardwired alarm system, you should connect EOL resistor on detector’s side. This can supervise wiring, so that when intruders cut cable, an alarm will be triggered immediately.

Wired Curtain PIR Main Features

Intelligent logic control, eliminate false alarm
Auto temperature compensation
Pulse count adjustment
Anti white light interference
Anti RF interference
Fresnel lens
Wall/ceiling installation
SMT manufacture technology, good stability
Execute criterion:GB10408.1 ; GB10408.5

Curtain PIR Technical Parameters

Power supply
9~16 VDC, 12 VDC typical
Static Current NC <15mA   NO <6mA ;
Alarm current
NC < 9mA    NO <18mA
Infrared sensor
Dual element, high sensitivity, low noise
Alarm period
1.5 ~ 2.5 sec.
Detection angle
15 degree wide
Detection range 9m
Mounting Method
wall or corner  mounted with bracket
Alarm output
NC, 0.2 A, 30 VDC
NC open trigger
Pulse count
1 / 2 / 3, selectable
Temperature -10°C~50°C(14°F~122°F)
76*34*31 mm

Leave a comment

Please login to leave a comment.