Outdoor Solar Powered Wireless Photoelectric Beam Barrier
Name: Solar Powered Beam Sensor
VG-2T30/60/100 is a new stylist design wireless beam sensor which powered by solar panel, the wireless infrared beam sensor built-in three active infrared beams, it consist of infrared transmitter and receiver. The infrared beam sensor built-in LiFePO4 Li-ion battery. It can works for a long time, even the infrared beam at night without light condition ( solar powered beam sensor can work 30 days, when there is no direct light access). Dual Infrared beams are proven to deliver effective and precise detection solutions, the beam sensor with IP66 rated waterproof design for both outdoor and indoor applications – with achievable coverage up to 100 meters.
Photoelectric beam detector consists of one transmitter and one receiver. It’s suitable for point to point intrusion detection. The detecting distance can reach up to 100m, to protect a property merely requiring four pairs photoelectric beam, the photoelectric beam creates invisible fence barrier which allow you setup a cost-effective perimeter solution that costs lower than electric fence, barbed wires, wooden fence. The system is also more beautiful and less-intrusive to better cater the security needs from both residential and commercial application.
Photoelectric beam detectors adopt weatherproof design can withstand extreme weather conditions such as dust, rain, snow, frost. The product has built-in AGC circuit design can automatically adjust emission power to adapt weather conditions. Dual beam design enables detector to accurately detect moving objects and eliminate false alarms caused by swaying tree branches, flying birds, small animals.
Built-in wireless transmitter, the photoelectric beam can communicate with wireless alarm panels to allow users to setup a completely wire-free intrusion detection alarm system that protect perimeter effectively. When working with burglar alarm panels, the system can deter intruders by triggering visual and audible warnings, meanwhile it will notify users by sending instant push notifications, phone call and text message. If users has subscribed alarm monitoring service, alarm signal will transit to alarm receiving center which has security operators to handle alarms
Our solar powered photoelectric beam detectors can protect medium and large critical places such as farms, houses, garages, driveway roads, warehouses, construction sites, school campus, factories, parking lots, commercial buildings, substations and more.
The Key features:
- Dual beams active infrared for perimeter intrusion detection
- Transmitter and receiver built-in high quality and solar panel (life span more than 10 years)
- Built in 433MHz wireless module, it can work with our wireless alarm system
- Wireless transmission distance: 100 meters
- Complete wireless sensor without any wires and cables when work with wireless alarm
- Waterproof IP66 rated housing design for outdoor installation
- Multi-beam design ensures a high rate of protection
- Anti-strong light interference, LED indicator for system status
- Equipped with the function of reporting to the host about any offset due to such causes as wind blowing after installation
- Model: VG-2T30, VG-2T60, VG-2T100
- Number of beams: Dual (2)
- Detection range: 30 meters, 60 meters, 100 meters
- Infrared wavelength: 940nm
- Light sources: digital filter type
- Sensor detection speed: 100ms
- Power supply: DC3.2V (Lithium iron phosphate battery)
- External rechargeable power: DC12V 500-1000mA
- Static current: transmitter<=0.5mA, receiver:<=0.3mA
- Max. trigger times: <=50 in 24 hours
- Solar panel output: 1800Lux>=0.2mA (note: outdoor cloudy day sun light = 2000Lux)
- Alarm output: relay output contact rating AC/DC 30V 0.5A max
- Wireless frequency: 433MHz AM
- Battery capacity: transmitter 500mAH; receiver 1000mAH
- Using temperature: -25 Celsius degree – 65 celsius degree
- Dismantle prevention output: relay output contact rating AC/DC 30V 0.5A Max.
- Adjusting angle of optical axis: 180°±90°
- Adjusting Angle of Optical Axis (Vertical): 20°±10°
- Hairline Pointer: Window type
- Connection: M3 Connection Assistance, Spiral Terminal
- Dedew and defrost method: built-in heater (optional)
- Other function: Induction Testing Output Terminal
- Warranty: 12 months factory warranty
- Material: PC engineering plastic/Resin