Wireless PIR Motion Sensor - Pet Immune

Unifore is pleased to release new motion sensor - VS-WH600, which is a pet immune wireless motion detector for wireless alarm system. This a slick, compact and cutting-edge motion detector which is based on passive infrared motion detection theory which detects moving body heat and reports it to the alarm panel through wireless radio frequency. This passive infrared motion sensor is ideal for home owners who want to install a reliable, low false alarm rate, plus pet-immune motion detector for home, shop, office security & protection.

Pet immune is its key feature for this new design motion detector, it allows user to choose different working modes including Pet immune, Normal, Anti-crawl. Additionally, it adopts pet immune lens which can intelligently reduce the false alarms which are caused by small animals, pest, pets.

Its pet immunity is 20kg, which means animals weighting up to 20 kg are ignored by the detector. Please note that despite the words "Pet immune to 20 kg" it's possible that animals with a lower weight trigger the detector. To avoid false alarm, detector should be installed properly according to the instruction manual. The risk of false triggering is particularly high when the animal is moving, jumping or flying in the vicinity of the detector.

This is a wide detection angle passive infrared motion sensor, its detection range covers 12m*12m and 100°. VS-WH600 is powered by batteries (2* 1.5V AA), which can be easily replaced once batteries run out.

Main Features

• 2015 elegant aesthetic design motion sensor
• 100 degrees, detection range is up to 12 meters
• Pet immune to 20 kg, indoor installation
• Pet immune, normal, anti-crawl working modes
• Low power consumption design
• Works with 2*1.5V AA batteries
• EDS/Anti-electric shock/Anti-mobile interference design
• Anti-white light design
• Up to 100 meters, RF wireless transmission range
• Working with 433MHz/868MHz wireless alarm panels
• Included with swivel bracket for wall/ceiling mounted installation

Technical Parameter

Customer Feedback (5)

• 

  Rupon

  21 January 2015 at 07:22 | #

  Hi can I get a sample off the new pir
  And some prices please

  reply

• 

  Jolly

  10 October 2016 at 18:52 | #

  Warning: When using this PIR motion detector, users should not adjust the [PULSE] setting. If you put a jumper on [PULSE], this will enable two way communication function. The PIR motion detector will emit alarm signal in every 4 hours. This will generate false alarms.

  reply

• 

  Zenon Krajewski

  03 June 2017 at 17:40 | #

  Hi there where I can buy PIR sensor ?

  reply

• 

  PATRIOT ELECTRONICS

  20 July 2017 at 09:48 | #

  hello,
  i have installed the wireless PIR motion detector (VS-WH600) with GSM800-16. But i have a problem with VS-WH600 the first time the LED is constantly ON, after 2 or 3 day the led falsh 3 times after detection and not send the alarm for control panel.

  reply

• 

  Unifore

  20 July 2017 at 09:56 | #

  For the VS-WH600, please do not adjust the PULSE jumper.

  reply