Guide For Programming Phone number For G40
Before do any programming, please make sure that GSM Alarm System GSM part is working.
Please check (note) following information before do any programming:
- Please use a valid SIMCard without PIN Code.
- Before turn on alarm system, you need to insert SIM Card first (do not insert SIM Card, when alarm system is power on).
- Connect the GSM Antenna to alarm panels, before turn on alarm system.
Now herein is the step by step for programming alarm receiver's phone number:
1. Prepare a SIM Card for alarm system, then insert SIM Card into alarm panels before turn on alarm panels.
2.Plug the GSM antenna, then turn on the alarm system, after 10 seconds the "GSM Signal" light will blinking.
3. Input password, then press “ENT” (the default password: 888888).
3. Select “Auto Dialer#’s”, then press “ENT”
3. Input “phone number(28901540) ”, then press “ENT”
3. Select “SMS phone#'s ”, then press “ENT”. ( The fist phone number programming is finished. if you want to finish the programming, press “EXT” to exist the program status)
Please note that if you select "SMS phone#'s ", the alarm system will dial phone number.
If you select "SMS Reporting", the alarm system will send SMS (short message).
3. After you finished the first phone number programming, then you can continue to program the second phone number programming.
( if you want to finish the programming, press “EXT” to exist the program status)